Woof and Welcome,
Olive the dog here. Today I’m going to reveal all the mistakes I made making the Eyelet Scarf and how we fixed them.
Problem – One section of the scarf is a lot thicker than the previous section
Ooops. This uneven width is caused by having different sized yarn for each section.
Keep the ply of the yarn the same for the whole project even when you change color. In other words if your first color is 8ply make sure your second color is 8ply too.
Problem – I don’t have the right number of stitches in my row.
There are 2 common causes for this. Either it got skipped in the middle of a row or it was dropped at the end of a row (most common).
Stretch out your work and have a careful look. Is there a little hole in it like this?
As a beginner, the best solution is to unravel your work and restitch it without a hole. If you have been counting your stitches every row, the hole will be in the row you’ve just done and you won’t have to unravel far, if not… well you might have to unravel more.
A STITCH DROPPED AT THE END OF THE ROW
Stretch out your work and look at it. Is one side of your work getting thinner like this?
If you dropped the stitch at the edge you need to do an extra stitch at the end to complete that line. If you have been counting your stitches every row this will fix the problem, however, if you have been losing stitches over several lines you may have to unravel back to the line where the first end stitch got dropped.
Problem – I’ve run out of the yarn I was using
In my scarf I ran out of the orange yarn I started with because I didn’t check I had the whole 50g I needed before I started. (It was a second hand ball of yarn, you won’t get this problem with a newly bought ball unless you miss read its label.)
If you are lucky you can buy more yarn of the same color. (You add it into the scarf in the same way as a new color.)
Alternately you can unravel it and use it for something else.
Or if you can’t bear to unravel you might be able to end that color and change to another one without it looking odd on the finished product.
In my case, I unravelled the orange and reused it in the middle section which didn’t require as much yarn.
Problem – My rows don’t add up to the right number
If you get to the end of a section and the rows just don’t add up, chances are you missed a row somewhere along the way.
The most likely thing is that you’ve done two dc or two sc rows in a row.
If your work looks like this you have left out a sc row. If you look carefully you will count from the bottom up a dc row, sc row, dc row, sc row, dc row and then another dc row – see how the posts tilt slightly to the left instead of the right?
Or if you’ve left out a dc row you might have something more like this:
You can see there is a dc row, a sc row, a dc row, a sc row, a dc row, two sc rows and a dc row, and a sc row at the top. The missed dc row leads to an extra horizontal line in the fabric, and then the dc are tilted to the left in the row following.
Yep, you got it, the sad truth is you’re going to have to unravel your work back to the mistake… unless you decide you don’t really care and just continue on, but on many patterns that will cause problems further on.
And we’ve reached the end of our trouble shooting. I hope I’ve been helpful. If you have any more problems please write in and tell us about them and even better, how you fixed them
So now we’ve reached the end of the Eyelet Scarf tutorial. It’s been woof…. I mean fun, I hope you’ll join me again for projects in the future. Enjoy your hooking!
Bye for now … Woof!